Timber Mill
   HOME

TheInfoList



OR:

A sawmill (saw mill, saw-mill) or lumber mill is a facility where logs are cut into
lumber Lumber is wood that has been processed into dimensional lumber, including beams and planks or boards, a stage in the process of wood production. Lumber is mainly used for construction framing, as well as finishing (floors, wall panels, wi ...
. Modern sawmills use a motorized saw to cut logs lengthwise to make long pieces, and crosswise to length depending on standard or custom sizes (
dimensional lumber Lumber is wood that has been processed into dimensional lumber, including beams and planks or boards, a stage in the process of wood production. Lumber is mainly used for construction framing, as well as finishing (floors, wall panels, wi ...
). The "portable" sawmill is of simple operation. The log lies flat on a steel bed, and the motorized saw cuts the log horizontally along the length of the bed, by the operator manually pushing the saw. The most basic kind of sawmill consists of a
chainsaw A chainsaw (or chain saw) is a portable gasoline-, electric-, or battery-powered saw that cuts with a set of teeth attached to a rotating chain driven along a guide bar. It is used in activities such as tree felling, limbing, bucking, pruning, ...
and a customized jig ("Alaskan sawmill"), with similar horizontal operation. Before the invention of the sawmill, boards were made in various
manual Manual may refer to: Instructions * User guide * Owner's manual * Instruction manual (gaming) * Online help Other uses * Manual (music), a keyboard, as for an organ * Manual (band) * Manual transmission * Manual, a bicycle technique similar to ...
ways, either rived (split) and planed,
hewn In woodworking, hewing is the process of converting a log from its rounded natural form into lumber (timber) with more or less flat surfaces using primarily an axe. It is an ancient method, and before the advent of the industrial-era type of ...
, or more often
hand saw In woodworking and carpentry, hand saws, also known as "panel saws", are used to cut pieces of wood into different shapes. This is usually done in order to join the pieces together and carve a wooden object. They usually operate by having a ser ...
n by two men with a
whipsaw A whipsaw or pitsaw was originally a type of saw used in a saw pit, and consisted of a narrow blade held rigid by a frame and called a frame saw or sash saw (see illustrations). This evolved into a straight, stiff blade without a frame, up to 1 ...
, one above and another in a
saw pit A saw pit or sawpit is a pit over which timber is positioned to be sawed with a long two-handled saw, usually a whipsaw, by two people, one standing above the timber and the other below. It was used for producing sawn planks from tree trunks, whi ...
below. The earliest known mechanical mill is the
Hierapolis sawmill The Hierapolis sawmill was a Roman water-powered stone sawmill at Hierapolis, Asia Minor (modern-day Turkey). Dating to the second half of the 3rd century AD, the sawmill is considered the earliest known machine to combine a crank with a conne ...
, a Roman water-powered stone mill at
Hierapolis Hierapolis (; grc, Ἱεράπολις, lit. "Holy City") was originally a Phrygian cult centre of the Anatolian mother goddess of Cybele and later a Greek city. Its location was centred upon the remarkable and copious hot springs in classica ...
,
Asia Minor Anatolia, tr, Anadolu Yarımadası), and the Anatolian plateau, also known as Asia Minor, is a large peninsula in Western Asia and the westernmost protrusion of the Asian continent. It constitutes the major part of modern-day Turkey. The re ...
dating back to the 3rd century AD. Other water-powered mills followed and by the 11th century they were widespread in Spain and North Africa, the Middle East and Central Asia, and in the next few centuries, spread across Europe. The circular motion of the wheel was converted to a reciprocating motion at the saw blade. Generally, only the saw was powered, and the logs had to be loaded and moved by hand. An early improvement was the development of a movable carriage, also water powered, to move the log steadily through the saw blade. By the time of the
Industrial Revolution The Industrial Revolution was the transition to new manufacturing processes in Great Britain, continental Europe, and the United States, that occurred during the period from around 1760 to about 1820–1840. This transition included going f ...
in the 18th century, the circular saw blade had been invented, and with the development of steam power in the 19th century, a much greater degree of mechanisation was possible. Scrap lumber from the mill provided a source of fuel for firing the boiler. The arrival of railroads meant that logs could be transported to mills rather than mills being built besides navigable waterways. By 1900, the largest sawmill in the world was operated by the Atlantic Lumber Company in Georgetown, South Carolina, using logs floated down the
Pee Dee River The Pee Dee River, also known as the Great Pee Dee River, is a river in the Carolinas of the United States. It originates in the Appalachian Mountains in North Carolina, where its upper course, above the mouth of the Uwharrie River The Uwharri ...
from the
Appalachian Mountains The Appalachian Mountains, often called the Appalachians, (french: Appalaches), are a system of mountains in eastern to northeastern North America. The Appalachians first formed roughly 480 million years ago during the Ordovician Period. They ...
. In the 20th century the introduction of electricity and high technology furthered this process, and now most sawmills are massive and expensive facilities in which most aspects of the work are computerized. Besides the sawn timber, use is made of all the by-products including
sawdust Sawdust (or wood dust) is a by-product or waste product of woodworking operations such as sawing, sanding, milling, planing, and routing. It is composed of small chippings of wood. These operations can be performed by woodworking machinery, ...
, bark,
woodchips Woodchips are small- to medium-sized pieces of wood formed by cutting or chipping larger pieces of wood such as trees, branches, logging residues, stumps, roots, and wood waste. Woodchips may be used as a biomass solid fuel and are raw material ...
, and
wood pellets Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass. Pellets can be made from any one of five general categories of biomass: industrial waste and co-products, food waste, agricultural residues, energy crops, and ...
, creating a diverse offering of
forest product A forest product is any material derived from forestry for direct consumption or commercial use, such as lumber, paper, or fodder for livestock. Wood, by far the dominant product of forests, is used for many purposes, such as wood fuel (e.g. in for ...
s.


Sawmill process

A sawmill's basic operation is much like those of hundreds of years ago; a log enters on one end and
dimensional lumber Lumber is wood that has been processed into dimensional lumber, including beams and planks or boards, a stage in the process of wood production. Lumber is mainly used for construction framing, as well as finishing (floors, wall panels, wi ...
exits on the other end. * After trees are selected for harvest, the next step in
logging Logging is the process of cutting, processing, and moving trees to a location for transport. It may include skidding, on-site processing, and loading of trees or logs onto trucks or skeleton cars. Logging is the beginning of a supply chain ...
is
felling Felling is the process of cutting down trees,"Feller" def. 2. and "Felling", def. 1. ''Oxford English Dictionary'' Second Edition on CD-ROM (v. 4.0) © Oxford University Press 2009 an element of the task of logging. The person cutting the tree ...
the trees, and
bucking Bucking is a movement performed by an animal in which it lowers its head and raises its hindquarters into the air while kicking out with the hind legs. It is most commonly seen in herbivores such as equines, cattle, deer, goats, and sheep. Most r ...
them to length. * Branches are cut off the trunk. This is known as ''limbing''. * Logs are taken by
logging truck A logging truck or timber lorry is a large truck used to carry logs. Some have integrated flatbeds, some are discrete tractor units, and some are configured to spread a load between the tractor unit and a dollied trailer pulled behind it. Ofte ...
, rail or a log drive to the sawmill. * Logs are scaled either on the way to the mill or upon arrival at the mill. * Debarking removes bark from the logs. * ''Decking'' is the process for sorting the logs by species, size and end use (lumber,
plywood Plywood is a material manufactured from thin layers or "plies" of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. It is an engineered wood from the family of manufactured ...
, chips). * A
sawyer *A sawyer (occupation) is someone who saws wood. *Sawyer, a fallen tree stuck on the bottom of a river, where it constitutes a danger to boating. Places in the United States Communities *Sawyer, Kansas *Sawyer, Kentucky * Sawyer, Michigan * Saw ...
uses a
head saw A head saw, framesaw, gang saw or head rig is the saw that makes the initial cuts in a log at a sawmill, turning a log into cants, or planks of wood. History The original powered head saw was composed of long, narrow blades that used an up-and-d ...
(also called head rig or primary saw) to break the log into cants (unfinished logs to be further processed) and flitches (unfinished planks). * Depending upon the species and quality of the log, the cants will either be further broken down by a
resaw A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf ...
or a
gang edger A lumber edger is a device with saws used to straighten and smooth rough lumber or bowed stock by making a cut along the sides of the boards. The result of this process is dimensional lumber. In a saw mill the edger is next in line from the head sa ...
into multiple flitches and/or boards. * ''Edging'' will take the flitch and trim off all irregular edges leaving four-sided
lumber Lumber is wood that has been processed into dimensional lumber, including beams and planks or boards, a stage in the process of wood production. Lumber is mainly used for construction framing, as well as finishing (floors, wall panels, wi ...
. * ''Trimming'' squares the ends at typical lumber lengths. * ''Drying'' removes naturally occurring moisture from the lumber. This can be done with
kilns A kiln is a thermally insulated chamber, a type of oven, that produces temperatures sufficient to complete some process, such as hardening, drying, or chemical changes. Kilns have been used for millennia to turn objects made from clay int ...
or air-dried. * ''Planing'' smooths the surface of the lumber leaving a uniform width and thickness. * ''Shipping'' transports the finished lumber to market.


Pre-Industrial Revolution

The
Hierapolis sawmill The Hierapolis sawmill was a Roman water-powered stone sawmill at Hierapolis, Asia Minor (modern-day Turkey). Dating to the second half of the 3rd century AD, the sawmill is considered the earliest known machine to combine a crank with a conne ...
, a water-powered stone sawmill at
Hierapolis Hierapolis (; grc, Ἱεράπολις, lit. "Holy City") was originally a Phrygian cult centre of the Anatolian mother goddess of Cybele and later a Greek city. Its location was centred upon the remarkable and copious hot springs in classica ...
,
Asia Minor Anatolia, tr, Anadolu Yarımadası), and the Anatolian plateau, also known as Asia Minor, is a large peninsula in Western Asia and the westernmost protrusion of the Asian continent. It constitutes the major part of modern-day Turkey. The re ...
(modern-day
Turkey Turkey ( tr, Türkiye ), officially the Republic of Türkiye ( tr, Türkiye Cumhuriyeti, links=no ), is a list of transcontinental countries, transcontinental country located mainly on the Anatolia, Anatolian Peninsula in Western Asia, with ...
, then part of the
Roman Empire The Roman Empire ( la, Imperium Romanum ; grc-gre, Βασιλεία τῶν Ῥωμαίων, Basileía tôn Rhōmaíōn) was the post-Republican period of ancient Rome. As a polity, it included large territorial holdings around the Mediterr ...
), dating to the second half of the 3rd century, is the earliest known sawmill. It also incorporates a crank and
connecting rod A connecting rod, also called a 'con rod', is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the cranksh ...
mechanism. Water-powered stone sawmills working with cranks and connecting rods, but without
gear train A gear train is a mechanical system formed by mounting gears on a frame so the teeth of the gears engage. Gear teeth are designed to ensure the pitch circles of engaging gears roll on each other without slipping, providing a smooth transmission ...
, are archaeologically attested for the 6th century at the
Byzantine The Byzantine Empire, also referred to as the Eastern Roman Empire or Byzantium, was the continuation of the Roman Empire primarily in its eastern provinces during Late Antiquity and the Middle Ages, when its capital city was Constantinopl ...
cities
Gerasa Jerash ( ar, جرش ''Ǧaraš''; grc, Γέρασα ''Gérasa'') is a city in northern Jordan. The city is the administrative center of the Jerash Governorate, and has a population of 50,745 as of 2015. It is located north of the capital cit ...
(in Asia Minor) and
Ephesus Ephesus (; grc-gre, Ἔφεσος, Éphesos; tr, Efes; may ultimately derive from hit, 𒀀𒉺𒊭, Apaša) was a city in ancient Greece on the coast of Ionia, southwest of present-day Selçuk in İzmir Province, Turkey. It was built in t ...
(in
Syria Syria ( ar, سُورِيَا or سُورِيَة, translit=Sūriyā), officially the Syrian Arab Republic ( ar, الجمهورية العربية السورية, al-Jumhūrīyah al-ʻArabīyah as-Sūrīyah), is a Western Asian country loc ...
). The earliest literary reference to a working sawmill comes from a
Roman Roman or Romans most often refers to: *Rome, the capital city of Italy *Ancient Rome, Roman civilization from 8th century BC to 5th century AD *Roman people, the people of ancient Rome *''Epistle to the Romans'', shortened to ''Romans'', a letter ...
poet,
Ausonius Decimius Magnus Ausonius (; – c. 395) was a Roman poet and teacher of rhetoric from Burdigala in Aquitaine, modern Bordeaux, France. For a time he was tutor to the future emperor Gratian, who afterwards bestowed the consulship on him. H ...
, who wrote a
topographical poem Topographical poetry or loco-descriptive poetry is a genre of poetry that describes, and often praises, a landscape or place. John Denham's 1642 poem "Cooper's Hill" established the genre, which peaked in popularity in 18th-century England. Exam ...
about the river
Moselle The Moselle ( , ; german: Mosel ; lb, Musel ) is a river that rises in the Vosges mountains and flows through north-eastern France and Luxembourg to western Germany. It is a bank (geography), left bank tributary of the Rhine, which it jo ...
in
Germany Germany,, officially the Federal Republic of Germany, is a country in Central Europe. It is the second most populous country in Europe after Russia, and the most populous member state of the European Union. Germany is situated betwe ...
in the late 4th century AD. At one point in the poem he describes the shrieking sound of a watermill cutting
marble Marble is a metamorphic rock composed of recrystallized carbonate minerals, most commonly calcite or Dolomite (mineral), dolomite. Marble is typically not Foliation (geology), foliated (layered), although there are exceptions. In geology, the ...
. Marble sawmills also seem to be indicated by the
Christian saint In religious belief, a saint is a person who is recognized as having an exceptional degree of holiness, likeness, or closeness to God. However, the use of the term ''saint'' depends on the context and denomination. In Catholic, Eastern Ortho ...
Gregory of Nyssa Gregory of Nyssa, also known as Gregory Nyssen ( grc-gre, Γρηγόριος Νύσσης; c. 335 – c. 395), was Bishop of Nyssa in Cappadocia from 372 to 376 and from 378 until his death in 395. He is venerated as a saint in Catholici ...
from
Anatolia Anatolia, tr, Anadolu Yarımadası), and the Anatolian plateau, also known as Asia Minor, is a large peninsula in Western Asia and the westernmost protrusion of the Asian continent. It constitutes the major part of modern-day Turkey. The re ...
around 370–390 AD, demonstrating a diversified use of water-power in many parts of the
Roman Empire The Roman Empire ( la, Imperium Romanum ; grc-gre, Βασιλεία τῶν Ῥωμαίων, Basileía tôn Rhōmaíōn) was the post-Republican period of ancient Rome. As a polity, it included large territorial holdings around the Mediterr ...
. By the 11th century,
hydropower Hydropower (from el, ὕδωρ, "water"), also known as water power, is the use of falling or fast-running water to Electricity generation, produce electricity or to power machines. This is achieved by energy transformation, converting the Pot ...
ed sawmills were in widespread use in the medieval
Islamic world The terms Muslim world and Islamic world commonly refer to the Islamic community, which is also known as the Ummah. This consists of all those who adhere to the religious beliefs and laws of Islam or to societies in which Islam is practiced. In ...
, from
Islamic Spain Al-Andalus translit. ; an, al-Andalus; ast, al-Ándalus; eu, al-Andalus; ber, ⴰⵏⴷⴰⵍⵓⵙ, label= Berber, translit=Andalus; ca, al-Àndalus; gl, al-Andalus; oc, Al Andalús; pt, al-Ândalus; es, al-Ándalus () was the Mu ...
and
North Africa North Africa, or Northern Africa is a region encompassing the northern portion of the African continent. There is no singularly accepted scope for the region, and it is sometimes defined as stretching from the Atlantic shores of Mauritania in ...
in the west to
Central Asia Central Asia, also known as Middle Asia, is a subregion, region of Asia that stretches from the Caspian Sea in the west to western China and Mongolia in the east, and from Afghanistan and Iran in the south to Russia in the north. It includes t ...
in the east. Sawmills later became widespread in
medieval Europe In the history of Europe, the Middle Ages or medieval period lasted approximately from the late 5th to the late 15th centuries, similar to the post-classical period of global history. It began with the fall of the Western Roman Empire a ...
, as one was sketched by
Villard de Honnecourt Villard de Honnecourt (''Wilars dehonecort'', ''Vilars de Honecourt'') was a 13th-century artist from Picardy in northern France. He is known to history only through a surviving portfolio or "sketchbook" containing about 250 drawings and designs ...
in c. 1225-1235. They are claimed to have been introduced to
Madeira ) , anthem = ( en, "Anthem of the Autonomous Region of Madeira") , song_type = Regional anthem , image_map=EU-Portugal_with_Madeira_circled.svg , map_alt=Location of Madeira , map_caption=Location of Madeira , subdivision_type=Sovereign st ...
following its discovery in c. 1420 and spread widely in Europe in the 16th century. Prior to the invention of the sawmill, boards were rived (split) and planed, or more often sawn by two men with a
whipsaw A whipsaw or pitsaw was originally a type of saw used in a saw pit, and consisted of a narrow blade held rigid by a frame and called a frame saw or sash saw (see illustrations). This evolved into a straight, stiff blade without a frame, up to 1 ...
, using saddleblocks to hold the log, and a
saw pit A saw pit or sawpit is a pit over which timber is positioned to be sawed with a long two-handled saw, usually a whipsaw, by two people, one standing above the timber and the other below. It was used for producing sawn planks from tree trunks, whi ...
for the pitman who worked below. Sawing was slow, and required strong and hearty men. The topsawer had to be the stronger of the two because the saw was pulled in turn by each man, and the lower had the advantage of gravity. The topsawyer also had to guide the saw so that the board was of even thickness. This was often done by following a chalkline. Early sawmills simply adapted the
whipsaw A whipsaw or pitsaw was originally a type of saw used in a saw pit, and consisted of a narrow blade held rigid by a frame and called a frame saw or sash saw (see illustrations). This evolved into a straight, stiff blade without a frame, up to 1 ...
to mechanical power, generally driven by a
water wheel A water wheel is a machine for converting the energy of flowing or falling water into useful forms of power, often in a watermill. A water wheel consists of a wheel (usually constructed from wood or metal), with a number of blades or buckets ...
to speed up the process. The circular motion of the wheel was changed to back-and-forth motion of the saw blade by a
connecting rod A connecting rod, also called a 'con rod', is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the cranksh ...
known as a ''
pitman arm A Pitman arm is a shaft that translates rotary or angular movement into linear movement, or vice versa. Pitman arms are commonly found in water pumping windmills, automotive steering systems, and sewing machines. In windmills, the Pitman arm con ...
'' (thus introducing a term used in many mechanical applications). Generally, only the saw was powered, and the logs had to be loaded and moved by hand. An early improvement was the development of a movable carriage, also water powered, to move the log steadily through the saw blade. A type of sawmill without a crank is known from Germany called "knock and drop" or simply "drop" -mills. In these drop sawmills, the frame carrying the saw blade is knocked upwards by cams as the shaft turns. These cams are let into the shaft on which the waterwheel sits. When the frame carrying the saw blade is in the topmost position it drops by its own weight, making a loud knocking noise, and in so doing it cuts the trunk. A small mill such as this would be the center of many rural communities in wood-exporting regions such as the
Baltic countries The Baltic states, et, Balti riigid or the Baltic countries is a geopolitical term, which currently is used to group three countries: Estonia, Latvia, and Lithuania. All three countries are members of NATO, the European Union, the Eurozone, ...
and
Canada Canada is a country in North America. Its ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, covering over , making it the world's second-largest country by tot ...
. The output of such mills would be quite low, perhaps only 500 boards per day. They would also generally only operate during the winter, the peak logging season. In the
United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...
, the sawmill was introduced soon after the colonisation of
Virginia Virginia, officially the Commonwealth of Virginia, is a state in the Mid-Atlantic and Southeastern regions of the United States, between the Atlantic Coast and the Appalachian Mountains. The geography and climate of the Commonwealth ar ...
by recruiting skilled men from
Hamburg (male), (female) en, Hamburger(s), Hamburgian(s) , timezone1 = Central (CET) , utc_offset1 = +1 , timezone1_DST = Central (CEST) , utc_offset1_DST = +2 , postal ...
. Later the metal parts were obtained from the
Netherlands ) , anthem = ( en, "William of Nassau") , image_map = , map_caption = , subdivision_type = Sovereign state , subdivision_name = Kingdom of the Netherlands , established_title = Before independence , established_date = Spanish Netherl ...
, where the technology was far ahead of that in
England England is a country that is part of the United Kingdom. It shares land borders with Wales to its west and Scotland to its north. The Irish Sea lies northwest and the Celtic Sea to the southwest. It is separated from continental Europe b ...
, where the sawmill remained largely unknown until the late 18th century. The arrival of a sawmill was a large and stimulative step in the growth of a frontier community.


Industrial Revolution

Early mills had been taken to the forest, where a temporary shelter was built, and the logs were skidded to the nearby mill by horse or ox teams, often when there was some snow to provide lubrication. As mills grew larger, they were usually established in more permanent facilities on a river, and the logs were floated down to them by
log driver Log driving is a means of moving logs (sawn tree trunks) from a forest to sawmills and pulp mills downstream using the current of a river. It was the main transportation method of the early logging industry in Europe and North America. Histor ...
s. Sawmills built on navigable rivers, lakes, or estuaries were called cargo mills because of the availability of ships transporting cargoes of logs to the sawmill and cargoes of lumber from the sawmill.Oakleaf p.8 The next improvement was the use of circular saw blades, perhaps invented in England in the late 18th century, but perhaps in 17th-century
Holland Holland is a geographical regionG. Geerts & H. Heestermans, 1981, ''Groot Woordenboek der Nederlandse Taal. Deel I'', Van Dale Lexicografie, Utrecht, p 1105 and former province on the western coast of the Netherlands. From the 10th to the 16th c ...
, the
Netherlands ) , anthem = ( en, "William of Nassau") , image_map = , map_caption = , subdivision_type = Sovereign state , subdivision_name = Kingdom of the Netherlands , established_title = Before independence , established_date = Spanish Netherl ...
. Soon thereafter, millers used gangsaws, which added additional blades so that a log would be reduced to boards in one quick step. Circular saw blades were extremely expensive and highly subject to damage by overheating or dirty logs. A new kind of technician arose, the
sawfiler A saw filer is a person who maintains and repairs saws in a saw mill. A saw filer's work area in the mill is called the filing room. Saws used in timber mills are very large. They need maintenance for safe operation. Repair of damaged saws requir ...
. Sawfilers were highly skilled in metalworking. Their main job was to ''set'' and sharpen teeth. The craft also involved learning how to ''hammer'' a saw, whereby a saw is deformed with a hammer and anvil to counteract the forces of heat and cutting. Modern
circular saw A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. ''Cir ...
blades have replaceable teeth, but still need to be hammered. The introduction of
steam power A steam engine is a heat engine that performs mechanical work using steam as its working fluid. The steam engine uses the force produced by steam pressure to push a piston back and forth inside a cylinder. This pushing force can be trans ...
in the 19th century created many new possibilities for mills. Availability of railroad transportation for logs and lumber encouraged building of rail mills away from navigable water. Steam powered sawmills could be far more mechanized. Scrap lumber from the mill provided a ready fuel source for firing the boiler. Efficiency was increased, but the capital cost of a new mill increased dramatically as well. In addition, the use of steam or gasoline-powered
traction engine A traction engine is a steam engine, steam-powered tractor used to move heavy loads on roads, plough ground or to provide power at a chosen location. The name derives from the Latin ''tractus'', meaning 'drawn', since the prime function of any t ...
s also allowed the entire sawmill to be mobile. By 1900, the largest sawmill in the world was operated by the Atlantic Lumber Company in
Georgetown, South Carolina Georgetown is the third oldest city in the U.S. state of South Carolina and the county seat of Georgetown County, South Carolina, Georgetown County, in the South Carolina Lowcountry, Lowcountry. As of the 2010 United States Census, 2010 census ...
, using logs floated down the
Pee Dee River The Pee Dee River, also known as the Great Pee Dee River, is a river in the Carolinas of the United States. It originates in the Appalachian Mountains in North Carolina, where its upper course, above the mouth of the Uwharrie River The Uwharri ...
from as far as the edge of the
Appalachian Mountains The Appalachian Mountains, often called the Appalachians, (french: Appalaches), are a system of mountains in eastern to northeastern North America. The Appalachians first formed roughly 480 million years ago during the Ordovician Period. They ...
in
North Carolina North Carolina () is a state in the Southeastern region of the United States. The state is the 28th largest and 9th-most populous of the United States. It is bordered by Virginia to the north, the Atlantic Ocean to the east, Georgia and So ...
. A restoration project fo
Sturgeon's Mill
in Northern California is underway, restoring one of the last steam-powered lumber mills still using its original equipment.


Current trends

In the twentieth century the introduction of electricity and high technology furthered this process, and now most sawmills are massive and expensive facilities in which most aspects of the work is
computer A computer is a machine that can be programmed to Execution (computing), carry out sequences of arithmetic or logical operations (computation) automatically. Modern digital electronic computers can perform generic sets of operations known as C ...
ized. The cost of a new facility with per day capacity is up to
CAN$ The Canadian dollar (symbol: $; code: CAD; french: dollar canadien) is the currency of Canada. It is abbreviated with the dollar sign $, there is no standard disambiguating form, but the abbreviation Can$ is often suggested by notable style ...
120,000,000. A modern operation will produce between annually. Small gasoline-powered sawmills run by local entrepreneurs served many communities in the early twentieth century, and specialty markets still today. A trend is the small
portable sawmill Portable sawmills are sawmills small enough to be moved easily and set up in the field. They have existed for over 100 years but grew in popularity in the United States starting in the 1970s, when the 1973 oil crisis and the back-to-the-land movemen ...
for personal or even professional use. Many different models have emerged with different designs and functions. They are especially suitable for producing limited volumes of boards, or specialty milling such as oversized timber. Portable sawmills have gained popularity for the convenience of bringing the sawmill to the logs and milling lumber in remote locations. Some remote communities that have experienced natural disasters have used portable sawmills to rebuild their communities out of the fallen trees. Technology has changed sawmill operations significantly in recent years, emphasizing increasing profits through waste minimization and increased energy efficiency as well as improving operator safety. The once-ubiquitous rusty, steel conical sawdust burners have for the most part vanished, as the sawdust and other mill waste is now processed into
particleboard Particle board, also known as chipboard or low-density fiberboard, is an engineered wood product manufactured from wood chips and a synthetic resin or other suitable binder, which is pressed and extruded. Particle board is often confused with ori ...
and related products, or used to heat wood-drying kilns. Co-generation facilities will produce power for the operation and may also feed superfluous energy onto the grid. While the bark may be ground for landscaping
barkdust In agriculture, gardening, and landscaping, barkdust (also bark dust, bark chips, bark mulch, beauty bark or simply bark) is a form of mulch produced out of chipped or shredded tree bark. Coarser forms of barkdust may be known as bark nuggets. Tr ...
, it may also be burned for heat. Sawdust may make particle board or be pressed into
wood pellet Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass. Pellets can be made from any one of five general categories of biomass: industrial waste and co-products, food waste, agricultural residues, energy crops, and ...
s for pellet stoves. The larger pieces of wood that won't make lumber are chipped into wood chips and provide a source of supply for paper mills. Wood by-products of the mills will also make
oriented strand board Oriented strand board (OSB) is a type of engineered wood similar to particle board, formed by adding adhesives and then compressing layers of wood strands (flakes) in specific orientations. It was invented by Armin Elmendorf in California in 1963. ...
(OSB) paneling for building construction, a cheaper alternative to plywood for paneling. Some automatic mills can process 800 small logs into bark chips, wood chips, sawdust and sorted, stacked, and bound planks, in an hour.


Gallery

File:Laser guided cutting of wood inside modern woodmill.jpg, Inside a modern sawmill equipped with laser-guided technology File:Laser guided cutting of wood in woodmill.jpg, Wood traveling on sawmill machinery File:Sawdust waste from mill.jpg, Sawdust waste from the mill File:D70-0745-armata-waterzaagmolen.jpg, A sawmill in Armata, on mount
Smolikas Mount Smolikas ( el, Σμόλικας; rup, Smolcu) is a mountain in the Ioannina regional unit, northwestern Greece. At a height of 2,637 metres above sea level, it is the highest of the Pindus Mountains, and the second highest mountain in Gr ...
, Epirus, Greece. File:Gunton Saw Mill - geograph.org.uk - 1936852.jpg, A preserved water powered sawmill,
Norfolk Norfolk () is a ceremonial and non-metropolitan county in East Anglia in England. It borders Lincolnshire to the north-west, Cambridgeshire to the west and south-west, and Suffolk to the south. Its northern and eastern boundaries are the No ...
, England. File:Sandakan Sabah Sawmill-20.jpg, Making planks from logs File:Moulin à Scie (Luchon) - Fonds Ancely - B315556101 A MALBOS 1 011.jpg, Sawmill in Luchon, France, near 1840 by
Eugène de Malbos Eugène de Malbos (21 August 1811 – 29 May 1858) was a French Romantic painter known for his lithographs of the Pyrenees The Pyrenees (; es, Pirineos ; french: Pyrénées ; ca, Pirineu ; eu, Pirinioak ; oc, Pirenèus ; an, Pirineus) is ...
File:Workers with the blades of a saw, at a sawmill (I0002371).tif, Sawmill workers posing with saw blades,
Rainy River District Rainy River District is a district and census division in Northwestern Ontario in the Canadian province of Ontario. It was created in 1885. It is the only division in Ontario that lies completely in the Central Time Zone, except for the townshi ...
, between 1900-1909. File:L' usine de transformation de bois Kotkamills Oy à Kotka.jpg, Sawmill with the floating logs in
Kotka Kotka (; ; la, Aquilopolis) is a city in the southern part of the Kymenlaakso province on the Gulf of Finland. Kotka is a major port and industrial city and also a diverse school and cultural city, which was formerly part of the old Kymi parish. ...
, Finland. File:Logs at sawmill at Manitoulin Island (I0014072).jpg, Logs at sawmill at Manitoulin Island 90-?


See also

*
Band saw A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumb ...
*
Circular saw A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. ''Cir ...
*
Hewing In woodworking, hewing is the process of converting a log from its rounded natural form into lumber (timber) with more or less flat surfaces using primarily an axe. It is an ancient method, and before the advent of the industrial-era type of ...
*
Log bucking image:Log Buckers with the Madera Sugar Pine Company, 1914.jpg, A crew of log buckers with crosscut saws in 1914. image:Bucker1.jpg, Bucker limbing dead branch stubs with a chainsaw, also known as knot bumping image:Bucker2.jpg, Bucker making a bu ...
*
Logging Logging is the process of cutting, processing, and moving trees to a location for transport. It may include skidding, on-site processing, and loading of trees or logs onto trucks or skeleton cars. Logging is the beginning of a supply chain ...
*
Lumber yard A lumber yard is a location where lumber and wood-related products used in construction and/or home improvement projects are processed or stored. Some lumber yards offer retail sales to consumers, and some of these may also provide services suc ...
*
Portable sawmill Portable sawmills are sawmills small enough to be moved easily and set up in the field. They have existed for over 100 years but grew in popularity in the United States starting in the 1970s, when the 1973 oil crisis and the back-to-the-land movemen ...
*
Saw pit A saw pit or sawpit is a pit over which timber is positioned to be sawed with a long two-handled saw, usually a whipsaw, by two people, one standing above the timber and the other below. It was used for producing sawn planks from tree trunks, whi ...
*
Sawfiler A saw filer is a person who maintains and repairs saws in a saw mill. A saw filer's work area in the mill is called the filing room. Saws used in timber mills are very large. They need maintenance for safe operation. Repair of damaged saws requir ...
*
Wood drying Wood drying (also seasoning lumber or wood seasoning) reduces the moisture content of wood before its use. When the drying is done in a kiln, the product is known as kiln-dried timber or lumber, whereas air drying is the more traditional method. ...


References


Sources

* * * *


External links


Steam powered saw mills



Nineteenth-century sawmill demonstration

Database of worldwide sawmills

Reynolds Bros Mill
northern foothills of Adirondack Mountains, New York State
L. Cass Bowen Mill
Skerry, New York {{Authority control Ancient Roman technology Saws Timber industry Timber preparation Economic history of the Dutch Republic Industrial history of the Netherlands